[SS-VehDev]

[william colburn]

Roman,

I think your proposed test will give us valuable
results. I am not certain how to apply the results to
the design excepting to use the "best" method and
materials.

BC

--- Ing. Roman Lev <r-composites at seznam.cz> wrote:

> Hi all,
> 
> please find attached files - design proposal for
> heat testing of coupons for NC. Dimensions for
> example 1by 5", window in the insulation 1x1".
> Thermocouple would be embeded on the exposed
> surface, between layer of tested thermal insulation
> and outer skin, below the inside skin. All the
> samples would be heated under same conditions, time
> until bend would be indication of relative withstand
> capability against the exposition. First of all I
> would like to verify it on few "blind" coupons, just
> to verify reproducibility. Comments &, suggestions,
> please.
> 
> thanks
> r+> _______________________________________________
> SS-VehDev mailing list
> SS-VehDev at sugarshot.org
> http://www.exrocketry.net/mailman/listinfo/ss-vehdev
>